Call Us Today! +632-8562-5921 | +632-8563-8888
Know How2019-03-20T15:49:23+00:00

Frequently Asked Questions

3D Deco Wall2019-03-21T16:05:13+00:00
  • How do I install the panels?

For a permanent application, we recommend using an environmental friendly montage glue to be applied at the area at the back of each panel that is in direct contact with the wall. If a temporary application is needed, we recommend double-sided foam tape.

  • Can I cut the panels?

Yes, you can. Panels are best cut using a knife or a jigsaw. For the best result, cut the panels at a point where small irregularities are the least visible, for example, at floor level or where the ceiling begins. If necessary, you can use fine sandpaper to smooth irregularities at the edges. Any unevenness between cutting edge and wall can be sealed with acrylic.

  • Can the wall panels also be applied to the ceiling?

Yes, this is possible when using a good quality glue.

  • How do I fill seams?

Because 3D Wall Deco bamboo wall panels are modular products, small seams may occur after mounting the panels on the wall. These seams can be filled using a (paintable) acrylic filter. To avoid cracks in the paint make sure the acrylic filler dries properly before finishing the wall in the desired color.

  • How do I clean the panels after installation?

Use ordinary household products for looking after them. The panels can be conveniently dusted with a dry cloth, If necessary you can use a slightly moist cloth. Do not use abrasive, aggressive substances or cleaning products based on chloride. We do not recommend using solvents.

  • What color are the 3D Wall Décor Panels?

The wall panels are a natural and standard off-white but can be finished in any desired color with paint.

  • What color are the 3D Wall Décor Panels?

The wall panels are a natural and standard off-white but can be finished in any desired color with paint.

  • What Kind of paint should be used?

Once the panels have been attached to the wall and treated with a primer, they can be painted. We recommend a matted water-based latex paint, although other kinds of paint (both water and oil based) can be used. Any color can be applied. Panels can be painted with a brush or a paint sprayer.

  • Do the panels improve the sound?

3D Wall Décor wall panels are primarily designed as wall decorations. Although acoustic improvements have been experienced, these effects have not been tested yet.

  • Are the 3D Wall Décor panels moisture resistant?

Yes, however, they should not come into direct contact with water. Application of wall panels in Bathrooms where there is often a lot of streams is not advisable.

  • Are the panels fire retardant?

Yes, the fire safety of our panels has been assessed and we have an ASTM E 84 Class A Certification. For European standards, these panels are classified as Euroclass E. This certification means that the fire and smoke development is limited and remains within the European fire safety standards.

  • Do the panels meet European safety standards?

Yes, 3D Wall Décor has extensive safety testing carried out. The wall panels meet all European standards with regards to, fire safety, water absorption, moisture resistance and expansion rate under various conditions.

  • Where can I find or buy HAUS PVC Wall & Ceiling products?

Interested enough? You can buy PVC Wall and Ceiling through our shop website https://hausconnection.com/ or also you can send us a message at Contact.

PVC Wall & Ceiling2019-03-21T16:02:08+00:00
  • Is it easy to install HAUS PVC Wall Product?

Yes. HAUS PVC panels are easy to install by the average do-it-yourself consumer. The panels can be cut to size using a saw (manual or electric).

  • What surfaces can HAUS PVC panels be installed?

The panels can be glued to smooth surfaces such as plaster or plasterboard or even to existing tiles! With rough, uneven walls the panels can be affixed to a framework using nails, staples or adhesive.

  • What is the maximum temperature for PVC Panels?

Our panels can withstand a maximum continuous temperature of 60 °C. This means that HAUS PVC panels can be used as a shower wall panel, but cannot be used in saunas. Installation near a stove is not recommended either.

  • What kind of Adhesive / Sealant should be used?

When gluing HAUS PVC Wall on regular surfaces such as plasterboard or wood, we recommend using adhesive. Read the instructions on the product before installing. We, generally, recommend using an MS polymer or 2-component polyurethane foam. All material will react differently when panels are installed. Therefore, take both factors into account: the PVC panel AND the surface it is glued to.

  • Should extra silicone be added between panels?

  • Easy and fast to install: PVC panels are very user-friendly products. The panels can easily be cut to size and are the ideal DIY solution. Compared to tiles, they take about half the time to install (no grouting!). Since they are so easy to install, any do-it-yourself consumer can fit them. This saves money on a fitter too.

  • Water-resistant: PVC panels are very popular in bathrooms and kitchens as they are water-repellent and mildew-resistant, but they can be used all over the house (basements, attics, garages, bedrooms, living rooms, etc.)

  • Budget-friendly: compared to tiling, you save a lot of time and work when installing PVC panels on walls and ceilings. PVC panels are often more interesting in terms of price as well when considering the cost per square meter.

  • Versatile product: our panels are ideal for cladding walls and ceilings of private houses, offices, hotels, laboratories, hospitals, food-processing plants, etc.

  • Hygienic: HAUS PVC panels provide a very clean and hygienic solution for wall and ceiling decoration. Once installed, there is no grout that gets dirty. PVC is mildew-resistant and prevents bacterial growth.

  • User-friendly: PVC panels require only limited aftercare. Cleaning does not take long. Dirt cannot collect in pores or cracks because of the smooth surface of the panels. A simple cloth will do to clean the surface. Do not use chlorinated or abrasive agents.

  • Recyclable: PVC is 100% recyclable. Our panels can be taken to any plastic recycling facility.

  • No further finishing required after installation: no paint, no lacquer, no varnish, etc.

  • How do HAUS PVC panels compare price-wise in relation to tiles?

Whether we look in quality it comes with excellent benefits considering the price-wise relation into tiles, tiles come in all sizes and weights, but due to the fact that PVC panels can be installed much faster than tiles, you can save on installation costs. Whether you hire someone to install the panels or do it yourself, you will save money!

  • Do HAUS PVC panels have any insulating value?

Yes. Hollow HAUS PVC panels have an insulating value of R 2.25 (0.16 W/m°K), which is comparable to the insulating value of a normal brick.

  • Can HAUS PVC panels be recycled?

Yes. HAUS PVC Wall & Ceiling panels can be recycled and be taken to any plastic recycling facility.

  • What is PVC?

Polyvinyl chloride (commonly abbreviated as PVC) is a widely-used plastic. Globally, more than 50% of all PVC manufactured is used in construction. As a building material, PVC is budget-friendly and easy to assemble. PVC is replacing traditional building materials such as wood, concrete, and clay.

  • Where can I find or buy HAUS PVC Wall & Ceiling products?

Interested enough? You can buy PVC Wall and Ceiling through our shop website https://hausconnection.com/ or also you can send us a message at Contact.